-
-
1 | 20It starts from the yoke. 140 loops are started, 2 harasho teeth are made. 9 leaf motifs are created by switching to the leaf model. Each leaf motif is woven 18 cm making harasho of 2 teeth between them. The loops are cut and finished in one go.
-
-
-
2 | 20Gather 42 bottle loops for the back piece by centering the beginning of the piece. A 13 cm lattice is made and the loops are cut and finished in one go. On the same side, for the front pieces, a lattice is made collecting the bottle 24 loops from both sides. After knitting 12 cm, 5 + 5 loops are cut from one side so that the neck reaches 14 loops, the loops are cut and finished in one go. The other is woven in the same way.
-
-
-
3 | 20ARM: 52 laps are collected from the shoulder bottle and the leaves are woven. 42 loops are achieved by cutting 1 loop on each side, once in 6 rows. When the length of the arm is 17 cm, 2 teeth are extracted and the loops are cut at the same time.
-
-
-
4 | 20HAT: 75 loops are plucked, 2-tooth harasho is made, and the sheet model is passed. 2 teeth are made again, the loops are cut and finished at the same time. A 12-row cage model is made by collecting 50 loops from the bottle from the part that started as a purl.
-
-
-
5 | 20Knit the 2-tooth block shoes again and move to the plain weave. When it is 12 cm, 1 stitch is cut with 7 separate stitches. In the next rows, 6, 5, 4, 3, 2 stitches are cut, and in the next row, all loops are cut at once.
-
-
-
6 | 20CUT: It starts with 42 loops, 9 rows of plain weave are made. 2 harasho teeth are woven. In the next row, 16 loops are knitted on both straight sides. By making the cage model with 10 loops in the middle, 33 loops are reached by cutting 1 loop on each side of the 16 loops woven into the sides. After the cutting process is complete, 1 sheet pattern is applied, 2 teeth are made, and the loops are cut at the same time.
-
-
-
7 | 20BLANKET: From 140 points, the cage model is applied. After weaving 79 cm in this way, the second tooth is woven and the loops are cut in one go. The 140-loop bottle is collected from one side and the sheet pattern is applied. The same process is repeated on each side. Before joining the bottle in each corner, 3 loops are collected and the corners are joined making a leaf pattern again. Width 83 cm Length 83 cm
-
-
-
8 | 20
-
-
-
9 | 20
-
-
-
10 | 20
-
-
-
11 | 20
-
-
-
12 | 20
-
-
-
13 | 20
-
-
-
14 | 20
-
-
-
15 | 20
-
-
-
16 | 20
-
-
-
17 | 20
-
-
-
18 | 20
-
-
-
19 | 20
-
-
20 | 20