Hello dear Amigurumi Knitting Lovers
Today we share a free amigurumi crochet pattern for you. As you know, we share new amigurumi free patterns every day. master crochets, amigurumi gazelles, amigurumi bears, amigurumi pola, amigurumi pandas, amigurumi penguins, amigurumi giraffes, amigurumi lama, amigurumi pigs, amigurumi rabbit, amigurumi clowns, amigurumi dolls, amigurumi unicorn, amigurumi elephants, amigurumi unicorn , amigurumi hippos, amigurumi monkeys, amigurumi cats, amigurumi dogs and more…

Don’t forget to subscribe to receive notifications of our new free recipes.

Today, the new daily crochet pattern Amigurumi Wİtch Girl Doll Free Crochet Pattern, I want to give you some information about this pattern;

Notes

• Doll size will be approximately 28cm height (with hat) when using same

yarn and hook size suggested. Different yarns and hook sizes may vary

the product size.

• For a better result, single crochet stitch should be crochet with Yarn

Under technique for doll body parts & with Yarn Over technique for

dress, shoes, hair and details. If you want to use same technique for the

whole pattern, please crochet more loosely or choose a hook size that

0.5mm bigger for Outfit parts.

• Optional materials are sometimes not suitable for children, so it is your

decision to use them or not:

Hard Plastic Straw with 6-8cm long is
used to insert inside doll’s neck. This will
make the neck more sturdy.

I put a piece of wire inside two arms
and cross through the chest so that the
doll may change her pose. If you don’t
find it suitable you can ignore the wire.

For the hair, I use glue gun to stick
hair strands onto the head. This way is
fast and convenient but it has weak
point that you may not repair anything
after glue. So if you don’t like to glue,
just sew them with yarn needle at the
pinned spots.

HANDS

• Color A – Make 2.
• Working in spiral continuous. Don’t stuff.
  R1. MR, 6x.
  R2. 6v.
  R3 – R6. 12x.
  (4 rows)
  R7. (2x, 1a) x 3.
  R8 – R28. 9x.
  (21 row)
• Cut yarn and leave long tail for sewing

LEGS

• Color B – Make 2.
• Work around chains. After R1, work
  in spiral continuos.
  R1. Ch7, Skip 1ch from hook, 1v, 4x, 4x
  into last chain, 4x, 1v.
  R2. 2v, 4x, 4v, 4x, 2v.
  R3 – R4. 24x.
  (2 rows)
  R5. 1a, 4x, 6a, 4x, 1a.
  R6. 4x, 4a, 4x.
  R7. 5x, 1a. 5x.
  R8 – R12. 11x
  (5 row)
  R13. 1v, 10x.
  R14. 1x, 1v, 10x.
  R15. 2x, 1v, 10x.
  R16 – R19. 14x.
  (4 rows)
• Stuff with fiberfilling

A. Left leg
R20. 2x, 1a, 10x.
R21. 2x, 1a, 9x.
R22. 12x.
R23. 3x, 1a, 2x, 4v, 1x.
R24. 6x, 4a, 1x.
R25. 2x, 1v, 8x.
R26. 3x, 1v, 8x.
R27. 4x, 1v, 8x.
R28. 4x, 1v, 9x.
R29. 5x, 1v, 9x.
R30. 6x, change to Color A, 4x, 1v, 5x.
R31 – R35. 17x.
(5 rows)
R36. 11x, 1v, 5x.
R37. 2x, 1sl.

• Cut yarn.

B. Right leg
R20. 2x, 1a, 10x.
R21 . 2x, 1a, 9x.
R22. 12x.
R23. 2x, 1a, 3x, 4v, 1x.
R24. 6x, 4a, 1x.
R25. 1x, 1v, 9x.
R26. 2x, 1v, 9x.
R27. 3x, 1v, 9x.
R28. 3x, 1v, 10x.
R29. 4x, 1v, 10x.
R30. 3x, 1v, 2x, change to Color A, 10x.
R31 – R35. 17x.
(5 rows)
R36. 3x, 1v, 13x.
R37. 12x, change Color B, 4x, sl.

• Do not cut yarn

Connect 2 legs
From Right Leg chain 2, sl into 3rd stitch of Left leg R37. The next single
crochet stitch will be the beginning stitch of Body R1. Stuff two legs then
continue working on spiral.

BODY

R1. 4x, 1v, 13x, 2x into ch2 FL, 13x, 1v, 4x, 2x
into ch2 BL. (42)
R2. 4x, 2v, 28x, 2v, 6x.
R3. 46x.
R4. 1a, 40x, 1a, 2x.
R5. 44x.
R6. 4x, 1a, 30x, 1a, 6x.

R7. 42x.
R8. (5x, 1a) x 6.
R9. Change to Color A, 36x.
R10. (2x, 1a) x 9.
R11 – R20. 27x.
(10 rows)
R21. (7x, 1a) x 3.
R22 – R23. 24x. Stuff with fiberfilling.

• Sew 3 stitches of left arm with R23’s
  (8th-9th-10th) stitches together.
• Sew 3 stitches of right arm with R23’s
  (21st-22nd-23rd) stitches together.
• Keep on crocheting to R24, crochet
  into both the body stitches and the arms
  stitches (except the 12 sewed ones) .
• Put a piece of wire inside two arms.

R24. 7x to body, 6x to left arm,
10x to body, 6x to right arm, 1x
to body. (30)
R25. (3x, 1a) x 6.
R26. 12a.
R27 – R31. 12x.
(5 rows)

• Stuff to chest.
• Insert plastic straw and stuff
  more from chest to neck.

HEAD

• Continue working in spiral.
  R1. 12v. (24)
  R2. (3x, 1v) x 6.
  R3. (4x, 1v) x 6.
  R4. (5x, 1v) x 6.
  R5. (6x, 1v) x 6.
  R6. (11x, 1v) x 4. (52)
  R7 – R8. 52x.
  (2 rows)

R9. 26x, 2a, 10x, 2a, 8x. (48)
R10 – R17. 48x.
(8 rows).

• Stuff and add safety eyes at R10-11 with 10sts
  in-between.
• Sew nose at R9 with Color A, over 4sts.

R18. (6x, 1a) x 6.
R19. (5x, 1a) x 6.
R20. (4x, 1a) x 6.
R21. (3x, 1a) x 6.
R22. (2x, 1a) x6.
R23. (1x, 1a) x 6.
R24. 6a.

• Cut yarn and leave a tail.
• From R18, stuff as you go till the last
  row. Close the head by sewing the
  yarn tail through 6 Front Loops of
  R24 then pull tightly.
• Separate black yarn thread into
  smaller strands to embroider , use 3
  strands for eyebrows & eyelashes, 5
  strands for eyeliner.

DRESS

• Use Color C. From R1 to R10, turn your work after each
  row.
• Chains at beginning of rows does not count as a stitch.
  R1. Ch28, skip 1 chain from hook, 27x.
  R2. Ch1, turn, 27x.
  R3. Ch1, turn, (8x, 1v) x 3.
  R4 – R10. Ch1, turn, 30x.
  R11. Start to crochet borders, do not turn and crochet
  around your worked piece.
• Left side: Ch1, 9x, ch1.
• Top side : 9x, 3T, 3F, 3T, 9x, ch1.
• Right side: 1x, ch4, 3x, ch4, 3x, ch4, 1x, sl. Cut yarn.

Dress 1st Layer

• When finished right side border, we meet
  1st stitch of R10 again, now continue to
  crochet into R10 Front Loops.
• Slip stitch at the end of every row to form
  a round.
  R12. Ch2, FL, 30vF, sl.
  R13. Ch2, (1F, 1vF) x 30, sl.
  R14. Ch2, 90F, sl.
  R15. Change to Color B, ch1, (1x, ch1, slip
  back into last x, ch1, 2x) x 30, sl.
• Cut yarn.

Dress 2nd Layer

• Use Color B, join the yarn into R10
  1st BL. Slip stitch at the end of every
  row to form round.
  R16. BL, ch2, (2F, 1vF) x 10, sl.
  R17. Ch2, 40F, sl.
  R18. Ch2, 40vF, sl.
  R19. Ch2, (1F, 1vF) x 40, sl.
  R20. Ch2, 120F, sl.
• Cut yarn.

Top side 2nd border

• Join Color B yarn into 1st stitch of top
  side border that made at R11.
• 11x, 2T, 1F, 2T,11x.
• Cut yarn.
• Sew 3 beads of 6mm round into left side
  border as buttons.

Dress top string

• Make a chains of 80.
• Slip the chains through the only F of 2nd
  topside then tie a bow at the back of the neck.
• Add 2 beads of 6mm round to 2 ends for
  decorating.

Dress Flower

• Use yarn Color C.
  R1. MR, 8x, sl.
  R2. Change to Color B, FL, (ch5, 1sl into same
  FL, 1sl into next FL) x 8. Cut yarn.
  R3. Join Color B into BL of R1, (ch8, 1sl into same
  BL, 1sl into next BL) x 8. Cut yarn.
• Sew or glue 3 beads of 4mm round at the
  center as shown in picture.

Dress Sleeves

• Use yarn Color C – Make 2.
  R1. Ch14, skip 2ch from hook, 12F, slip to form a round.
  R2. Ch2, (1F, 1vF) x 6, sl.
  R3. Ch2, (2F, 1vF) x 6, sl.
  R4. Ch2, 24F.
  R5. Ch1, 5a, 1x, 6a, 1x, sl.
  R6. Ch1, 13x, sl.
  R7. Ch2, FL, (1T, ch2) x 13, sl. Cut yarn.
• Join Color B yarn into 1st BL of R6.
  R8. Ch2, BL, 13vT, sl.
  R9. (Ch2, 1sl into next st) x 26, sl. Cut yarn.

• Join Color B yarn into
  1st loop of R1.
  R10. Ch1, 12x, ch4, slip
  into 12th stitch. Cut
  yarn.
• Sew 1 bead of 4mm
  round into left side as
  button.

SHOES

• Use Color C yarn – Make 2.
• Work around chains. After R1 continue to work in
  spiral.
  R1. Ch9, skip 1ch from hook, 1v, 6x, 4x into last chain,
  6x, 1v.
  R2. 2v, 6x. 4v, 6x, 2v.
  R3. 28x.
  R4. 7x, 2a. 6x. 2a. 7x.
  R5.24x.
  R6. 1sl, ch50. Cut yarn and leave tail.
• Slip the chains through 11th or 12th stitch of R5, wrap
  around the leg and hide yarn tail inside.
• Add 1 bead of 6mm round for each shoe.

HAIR

• Use Color D yarn – Make 3 layers – Total 42 strands.
• Attach hair strands of each layer as shown in photos.
  1st Layer: Total 16 strands.
  R1. MR, 6x.
  R2. 6v.
  R3. BL, (1x, 1v) x 6. (18)
  R4. BL, (2x, 1v) x 6. (24)
  R5. – (ch46, skip 1ch from hook, 44x, 1sl, 1sl
  into next stitch) x 8.
• (1sl into next stitch) x 8.
• (ch46, skip 1ch from hook , 44x, 1sl, 1sl into
  next stitch) x 8.
• Cut yarn.

2nd Layer: Total 14 strands.
Join yarn into 1st FL of R3.

• (ch46, skip 1ch , 44x, 1sl, 1sl into next FL) x 6.
• (ch41, skip 1ch, 39x, 1sl, 1sl into next FL) x 1.
• (1sl into next FL) x 4.
• (ch41, skip 1ch, 39x, 1sl, 1sl into next FL) x 1.
• (ch46, skip 1ch , 44x, 1sl, 1sl into next FL) x 6.
• Cut yarn.
• Leave 7th strand unpinned.

3rd Layer: Total 12 strands.
Join yarn into 1st FL of R2.

• (ch46, skip 1ch, 44x, 1sl, 1sl into next FL) x 3.
• (ch41, skip 1ch, 39x, 1sl, 1sl into next FL) x 2.
• (ch11, skip 1ch, 9x, 1sl, 1sl into next FL) x 4.
• (ch46, skip 1ch, 44x, 1sl, 1sl into next FL) x 3.
• Cut yarn,
• Make a braid with 7th strand of 2nd Layer and 4th +
  5th strand of 3rd Layer

HAT

• Start with Color B yarn. Work in spiral.
  […] is for counting the sts easier, it does
  not mean to crochet as a cluster.
• R1. MR, 4x.
  R2. (1x, 1v) x 2.
  R3. (1x, 1v) x 3.
  R4 – R5. 9x.
  (2 rows)
  R6. [2x, (1x, 1F) into 1 stitch], [2F, (1x, 1F)
  into 1 stitch], [2x, 1v]. (12)
  R7. Change to Color C, 5x, 1v, 2F, 3x, 1v.
  (14)
  R8. (6x, 1v) x 2. (16)
  R9. 3F, 4x, 1v, 7x, 1v. (18)
  R10. 18x.
  R11. [(2x, 1v) x 4], [2F, (1F, 1x) into 1
  stitch], [2x, 1v]. (24)
  R12. 24x.

R13. [2x, 1F, 1vF], [1F, 2x, 1v], [1x, 2F, 1vF],
[(3x, 1v) x 3]. (30)
R14. 30x.
R15. [(4x, 1v) x 3], [4F, 1v], [4x, 1v], [4F,
1v]. (36)
R16. [5x, 1v], [1x, 3F, 1x, 1v], [5x, 1v], [1x,
3F, 1x, 1v], [5x, 1v], [4F, 1x, 1v]. (42)
R17. 42x.
R18. BL, (6x, 1v) x 6. (48)
R19. (5x, 1v) x 8. (56)
R20. (6x, 1v) x 8. (64)
R21. Change to Color B, 64x.
R22. 64x.
R23. FL, (1x, ch2) x 64, sl. Cut yarn.

• Join Color B yarn into FL of R17.
  R24. FL, (1x, ch2) x 48, sl.
• Cut yarn.

HAT FLOWER

• Use Color B yarn.
  R1. MR, 8x, sl.
  R2. (ch6, 1sl into same stitch, 1sl into
  next stitch) x 8. Cut yarn.
• Sew or glue 3 beads of 4mm round
  at the center.

BROOM SHAFT

• To make broom shaft, I used a piece of 20cm
  length of wire for this 28cm doll. If you use a
  different yarn and hook size that will vary the size
  of doll, please notice the length of broom shaft.
• Cover the stick with paper tape. Wrap Black
  yarn over the stick by length. Wrap in total 3 or 4
  layers as you want.

• Use Color E – Beige for the broom cap.
  R1. Ch7, slip to form a round.
  R2. Ch1, 8x into round, sl.

R3 – R4. Ch1, 8x, sl.
R5. Ch2, 8F, sl.
R6. Ch1, (1x, 1v) x 4, sl.
R7. BL, (ch11, 9x, 1sl, 1sl into
next BL) x 12. Cut yarn.

• Join yarn into FL of R6.
  R8. FL, (ch10, 8x, 1sl, 1sl into
  next FL) x 12. Cut yarn.
• Glue 2 layers of broom cap
  cover 1 end of broom shaft
  and wrap black yarn as shown
  in photos.

BOW

• MR, ch3, 1F, 2Tr, 1F, ch3,
  1sl, ch3, 1F, 2Tr, 1F, ch3,
  sl.
• Pull the MR tightly and
  wrap the tail over center
  to form a bow.
• Decorate the bow with
  4mm round beads

Your doll is Ready!