Video – Galeri is a blg web site that have DIY videos
DIY Crochet, we love DIY and Crochet hand works
Amigurumi
When I first designed this dragon I made two, a green one and a red one but they remained faceless for a couple days while I thought about what I wanted the face to look like. I was taking photos of them when my youngest son came in. He played with them for a bit and then said,
“This green one should be a good and friendly dragon and this red one should be a fierce but good dragon. They should be named Dreams and Nightmare”
I just love those names so much! A light bulb went off in my head just then. I decided on two different looks for their faces. You will see instructions for the head that will give you either the sleepy head or the fierce head look. You decide what look you want your dragon to have. Dreams looks a little sleepy so I refer to “sleepy” or “fierce” in the instructions below.
Size: Dragon is 16 -18 inches tall. Please see the supplies list below for the amount of yarn needed.
How To Print This Pattern:
This is quite a long pattern. You can print it off by using a free service here.
There are 3 parts to this pattern:
Part One ~ Written pattern scroll down this page
Part Two ~ Stuffing and shaping with photos here
Part Three ~ Assembly of Dragon here
This is a free pattern for all to enjoy. If you would like to leave a donation please do so by using the donation button also located at the bottom of this pattern. Donations of any size are greatly appreciated and do help me to keep on providing free patterns.
Thank you so much and enjoy!
Supplies:
2 rolls of Red Heart Super Saver yarn OR 1 jumbo roll of Red Heart Comfort yarn in any color for the head, body, tail, limbs, outer wings and head parts
a small amount of yarn in an alternate color for the inner wings and spikes
a very small amount for the eyeballs
4.5mm hook if you crochet loose and see gaps then try a smaller hook
blunt end yarn needle for sewing
scissors
polyester stuffing
depending on type of eye you make, a small button, safety eye, felt or scrap piece of yarn for the pupil
4 pipe cleaners (preferably a similar color as the outer wing)
Abbreviations:
st = stitch
sc = single crochet
sl st = slip stitch
hdc = half double crochet
dc = double crochet
2tog = crochet 2 stitches together
FLO = front loops only
f/o = finish off
*Please read the introduction at the top of this page which explains why there are 2 different instructions for the eyes and mouth. Look at the top for sizing, supplies needed and other important notes. There are videos that go through each section of the dragon if you need that extra help. There is also a page with photos and written instructions for each part if you prefer that to a video. See here.
VIDEO TUTORIAL FOR THE BODY IS HERE
There videos for each part of the dragon, I’ve including some links right in the parts themselves, There is also a written instruction page with photos if you prefer that to a video. See here.
Starting at the bottom of the body working up to the neck.
BODY:
1) magic circle with 6sc (6)
2) 2hdc in each (12) add a marker in last st of this row and move marker at the end of
each row
3) 2hdc in each st (24)
4) 1hdc then 2hdc in the next st, repeat to marker (36)
5) 1hdc in the next 5st then 2hdc in the next st, repeat to marker (42)
6) 1hdc in the next 6st then 2hdc in the next st, repeat to marker (48)
7) 1hdc in the next 7st then 2hdc in the next st, repeat to marker (54)
8) 1hdc in the next 27st then 1sc in the next 27st (54)
9-15) repeat row 8 for 7 rows
16) 1sc in the next 3st then 1hdc next 21st then 1sc in the next 30st (54)
17) 1sc in the next 4st then 1hdc in the next 18st then repeat this next sequence, (1sc in next 6st then sc2tog), to the marker. When you land on the marker you should be crocheting 2st together (50)
18) 1sc in the next 8st then 2tog, repeat to marker (45)
19) 1sc in the next 5st then 1hdc in the next 15st then 1sc in next 25st (45)
20) 1sc in the next 3st then 2tog, repeat sequence 5 times. Then 1sc in next 20st (40)
21) 1sc in the next 8st then 2tog, repeat to marker (36)
22) 1sc in the next 6st then 1hdc in next 12st, 1sc in next 18st (36)
23) repeat row 22
24) 1sc in the next 4st then 2tog, repeat to marker (30)
25) 1sc in each st for 1 row
stuff body, shape as you stuff
26) 1sc in the next 8st then 1hdc in next 10st, 1sc in next 12st (30)
27-29) repeat row 26 for 3 rows
30) 1sc in the next 3st then 2tog, repeat to marker (24)
31) 1sc in each st for 1 row
32) 1sc in the next 4st then 2tog, repeat to marker (20)
33) 1sc in the next 6st then 1hdc in next 8st then 1sc in next 6st (20)
34) 1hdc in the next 6st then 1sc in next 8st then 1hdc in next 6st (20)
35) repeat row 34
36) 1hdc in the next 6st then 1sc in next 2st then sc2tog then sc2tog then 1sc in next 4st, then 1hdc in next 4st (18)
37) 1hdc in the next 7st then 1sc in next 8st, 1hdc in next 3st (18)
stuff more, shape as you stuff
38) 2hdc in the next 5st then 1hdc in next 2st, then 1sc in next 2st then sc2tog then 1sc in next 7st (22)
39) 1hdc in the next 13st then 1sc in next 2st then sc2tog, sc2tog, then 1sc in next 3st (20)
40) 1hdc in the next 10st then 1sc in next 10st (20)
41-42) repeat row 40 for 2 rows
43) 1sc in next 8st then 2tog, repeat to marker (18)
stuff and shape as you stuff
44-47) 1sc in each st for 4 rows
48) 1sc in next 4st then 2tog, repeat to marker (15)
49) 1sc in each st for 1 row
50) 1sc in next 3st then 2tog, repeat to marker (12)
sl st next st and f/o leaving a tail for sewing. Stuff firmly so that when you sew the head in place the neck does not flop over or wrinkle. You can use wire, just be sure to loop and tape the ends of the wire so they never poke through. I used wire in one of my dragons and no wire for the others. There is no real difference except I can pose the one head a bit more than the others.
Head: for this part and the rest of the dragon parts, the sequences given are to be repeated to the marker. Make sure to use a marker and move the marker at the end of every row . Video here
1) magic circle with 6sc (6)
2) 2sc in each st (12)
3) 1sc then 2sc in next st (18)
4) 1sc in next 2st then 2sc in next st (24)
5) 1sc in next 3st then 2sc in next st (30)
6) 1sc in next 4st then 2sc in next st (36)
7-11) 1sc in each st for 5 rows
12) 1sc in next 4st then 2tog (30)
13) 1sc in each st for 1 row
14) 1sc in next 3st then 2tog (24)
15-18) 1sc in each st for 4 rows
19) 1sc in next 2st then 2tog (18)
20-21) 1sc in each st for 2 rows
22) 2sc in next 6 FLO then 2sc in next 12st (36)
23) 1hdc in next 12 FLO then 1sc in next 24st (36)
24) 1hdc in next 12st then repeat this sequence, 1sc in next 4st then 2tog, to the marker (32)
25) 1hdc in next 12st then 1sc in next 20st (32)
stuff snout, shape as you stuff
26-27) repeat row 25 for 2 rows
28) 1sc in each st for 1 row
29) 1sc in next 6st then 2tog (28)
30) 1sc in next 5st then 2tog (24)
31) 1sc in next 2st then 2tog (18)
stuff head. The hdc’s are the top of the head and you should be stuffing and shape accordingly. Please view the photos OR video if unsure how to properly stuff and shape.
32) 1sc then 2tog (12)
sl st next st and f/o leaving a tail for sewing. Weave in and out of the FLO of the stitches.
stuff more and shape as you stuff.
Pull tight and knot off. Hide yarn tail inside head.
Nostrils: Video here
Insert hook in between the 6th and 7th row or 7th and 8th row (depends on how firmly you stuffed, eye it up and choose by what would look better) ch 1 then make 3dc in first space and 3dc in next space, sl st into next space then f/o. There should be at least 4 visible stitch holes between nostrils. Shape the nostrils and sew the yarn tails into the head.
Ears: work starting yarn tail into 2nd or 3rd row. Video here
1) magic circle with 6sc (6)
2) 2sc in each (12)
3) 1sc then 2sc in next st (18)
4) 1sc in next 2st then 2sc in next st (24)
sl st next st and f/o leaving a tail for sewing.
roll and sew the end to hold the shape. One end should be closed and the other end open like a rolled taco. Make sure to roll the 2nd ear in the opposite direction so the ears match when sewn onto the dragon.
Top Eyelid for Fierce but Friendly Dragon Video for all the eye parts here
1) ch8 begin with a long enough starting tail to sew into the head
2) start with 2nd ch from hook, 1sc in each ch (7) ch1 and turn
3) 1sc, 1hdc, 2dc next 3st, 1hdc, sl st last st
f/o leaving a long tail for sewing
Bottom Eyelid for Fierce but Friendly Dragon
1) ch8 begin with a long enough starting tail to sew into the head
2) start with 2nd ch from hook, 1sc, 1hdc next 5st, sl st last st (7)
f/o leaving a long tail for sewing
Eyeball for Fierce but Friendly Dragon
1) magic circle with 6sc (6)
2) 2sc in each (12)
3) 1sc in each st for 1 row
sl st next st and f/o. Cut yarn tail shorter and tuck behind eye when ready to sew to the head. Use colored yarn whip stitch on a pupil, play around with it. I did one with colored yarn then black in the middle, it looks pretty cool that way.
Top Eyelid for Sleepy Looking Dragon
1) ch8 begin with a long enough starting tail to sew into the head
2) start with 2nd ch from hook, 1sc then 1dc next 5st then sl st last st
f/o leaving a long tail for sewing
Bottom Eyelid for Sleepy Looking Dragon
1) ch6
f/o leaving a long tail for sewing
Eyeball for Sleepy Looking Dragon
1) magic circle with 6sc (6)
sl st next st and f/o. Cut yarn tail shorter and tuck behind eye when ready to sew to the head. Sew a solid button onto the circle.
You can glue this whole piece to the head or sew it to the head
Mouth for Both Dragons Video here
1) magic circle with 6sc (6)
2) 2sc in each (12)
3) 1sc then 2sc in next st (18)
4) 1sc in next 2st then 2sc in next st (24)
for rows 5-8 start in 2nd st from hook
5) 1sc in next 5st then ch1 and turn
6) 1sc in next 5st then ch1 and tun
7) 1sc in next 5st then ch1 and turn
8) 1sc in next 5st then ch1 and turn
9) 1sc in next 5st then (for Sleepy Dragon f/o here leaving a long tail for sewing) for Fierce Dragon continue on: ch1 and continue down the edge, 1sc in next 5 spaces. Once you reach the rounded part of the mouth, ch1 then 1sc in same stitch, ch1 then 1sc in next stitch, repeat all the way around until you reach the corner of the straight edge, 1sc in next 5 spaces, f/o leaving a long tail for sewing.
Arms: Video here
1) magic circle with 6sc (6)
2) 1sc in next 2st then 2sc in next st (8)
3) 1sc in next 3st then 2sc in next st (10)
4-16) 1sc in each st for 13 rows
17) 2sc in each st (20)
18) make 4 fingers
Legs: video here
1) magic circle with 6sc (6)
2) 2sc in each (12)
3) 1sc then 2sc in next st (18)
4) 1sc in next 2st then 2sc in next st (24)
5) 1sc in next 3st then 2sc in next st (30)
6-8) 1sc in each st for 3 rows
9) 1sc in next 2st then 2tog, repeat sequence until there is 6st left to the marker (the stitch holding the marker is included in that count), put 1sc in each of those 6st (24)
10) 1sc then 2tog (16)
11-14) 1sc in each st for 4 rows
sl st next st and f/o leaving a long tail for sewing. Stuff and shape foot, lightly stuff leg
Tail: video here
1) magic circle with 6sc (6)
2-6) 1sc in each st for 5 rows
7) 1sc in next 2st then 2sc in next st (8)
8-10) 1sc in each st for 3 rows
11) 1sc in next 3st then 2sc in next st (10)
12-14) 1sc in each st for 3 rows
15) 1sc in next 4st then 2sc in next st (12)
16-18) 1sc in each st for 3 rows
19) 1sc in next 3st then 2sc in next st (15)
20-22) 1sc in each st for 3 rows
23) 1sc in next 4st then 2sc in next st (18)
24-26) 1sc in each st for 3 rows
27) 1sc in next 2st then 2sc in next st (24)
28-30) 1sc in each st for 3 rows
31) 1sc in next 3st then 2sc in next st (30)
32-34) 1sc in each st for 3 rows
35) 1sc in next 4st then 2sc in next st (36)
36-38) 1sc in each st for 3 rows
39) 1sc in next 5st then 2sc in next st (42)
40-42) 1sc in each st for 3 rows
43) 1sc in next 6st then 2sc in next st (48)
44-46) 1sc in each st for 3 rows
sl st next st and f/o leaving a long tail for sewing
*Instructions for the tail ridge and tail spike are in part two. OR view the video for adding the ridge and spikes here
Tummy Patch: with alternate color. video here
for rows using hdc always ch2 and turn and start with 3rd st from hook,
for rows using sc always ch1 and turn and start with 2nd st from hook,
1) ch21
2) starting with 2nd ch from hook, 1sc in each ch (20)
3-11) 1hdc in each st for 9 rows (20)
12) 1sc in next 3st then 2tog, repeat to marker (16)
13-14) 1hdc in each st for 2 rows
15) 1sc in next 2st then 2tog (12)
16-17) 1hdc in each st for 2 rows
18) 1sc in next 4st then 2tog (10)
19) 1hdc in each st for 1 row
20) 1sc in next 3st then 2tog (8)
21-25) 1hdc in each st for 5 rows
26) 1sc in next 2st then 2tog (6)
27-33) 1hdc in each st for 7 rows
34) 1sc then 2tog (4)
35) 1hdc in each st for 1 row
36) 1sc in each st for 1 row
f/o leaving a long tail for sewing
Wings:
I did not design left or right, you make 2 of each for the outer and inner wing.
More details about the wings is given with photos in part 2 here
Video for making and assembling the wings here
Outer Wing: with body color make 2
1) ch16
2) start in 2nd ch from hook, 1sc in each ch (15) ch2 and turn,
3) start in 3rd st from hook, 1hdc in next 11st, ch3 and turn,
4) start in 4th st from hook, 1hdc in next 9st then sc2tog , ch2 and turn
5) start in 3rd st from hook, 1hdc in next 7st, ch3 and turn,
6) start in 4th st from hook, 1hdc in next 5st then sc2tog
working now along the edge to the left of your last st, you’ll have to push your hook through, 2tog then 2tog then 2tog then 1sc in the outer loop of the corner. Next, working along the outer loops of the row, 1sc in each of the 15 outer loops, ch1 then working in both loops, sc around the edge and to the first inner corner, now you have to push your hook through, continue working with sc. Working along the edge of the wing tips you will have to push through what was the chain of 3 we made, push through single loops of that chain. Work in both loops of stitches when you can and work along the very outer edge of the wing trying your best to maintain the shape. Once you get all the way around, f/o leaving a long tail for sewing.
Inner Wing: with alternate color make 2
1) ch14
2) start in 2nd ch from hook, 1sc in each ch (13) ch2 and turn,
3) start in 3rd st from hook, 1hdc in next 9st, ch3 and turn,
4) start in 4th st from hook, 1hdc in next 7st then sc2tog , ch2 and turn
5) start in 3rd st from hook, 1hdc in next 5st, ch3 and turn,
6) start in 4th st from hook, 1hdc in next 3st then sc2tog
working now along the edge to the left of your last st, you’ll have to push your hook through, 2tog then 2tog then 2tog then 1sc in the outer loop of the corner. Next, working along the outer loops of the row, 1sc in each of the 13 outer loops, ch1 then working in both loops, sc around the edge and to the first inner corner, now you have to push your hook through, continue working with sc. Working along the edges of the wing tip you will have to push through what was the chain of 3 we made, push through loops of that chain. Work in both loops of stitches when you can and work along the very outer edge of the wing trying your best to maintain the shape. Once you get all the way around, f/o. You do not use these yarn tails for sewing, they will get tucked in between the wing pieces.
